VSaero FRP TKYO Bunny v2 Wide Body Kit > Nissan 240SX 1989-1994 > 2/3dr(vsaero_108374)

(No reviews yet) Write a Review
$1,851.00
SKU:
vsaero_108374
Type:
Exterior
Type:
Complete Body Kits
Availability:
Out of Stock
Location:
-
Stock:
0

Product Overview

This is a TKYO Bunny v2 Wide Body Kit manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.

Kit Includes:

VSaero FRP TKYO Bunny v2 Front Bumper > Nissan 240SX 1989-1994 > 2/3dr (vsaero_108367)


VSaero FRP TKYO Bunny v2 Wide Body Front Canards 4pc > Nissan 240SX 1989-1994 > 2/3dr (vsaero_108368)


VSaero FRP TKYO Bunny v2 Wide Body Front Splitter > Nissan 240SX 1989-1994 > 2/3dr (vsaero_108369)


VSaero FRP TKYO Bunny v2 Wide Body 50mm Fender Flares (front) 4pc > Nissan 240SX 1989-1994 > 2/3dr (vsaero_108370)


VSaero FRP TKYO Bunny v2 Side Skirts > Nissan 240SX 1989-1994 > 2/3dr (vsaero_108371)


VSaero FRP TKYO Bunny v2 Wide Body 80mm Fender Flares (rear) > Nissan 240SX 1989-1994 > 2/3dr (vsaero_108372)


VSaero Plastic TKYO Bunny v2 Diffuser > Nissan 240SX 1989-1994 > 2/3dr (vsaero_108373)


New: A brand-new, VSaero FRP TKYO Bunny v2 Wide Body Kit > Nissan 240SX 1989-1994 > 2/3dr manufactured by VSaero. Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. VSaero fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization.

Reviews

(No reviews yet) Write a Review